Basic Info.
After-sales Service
Overseas Aftersale Service
Maximum Lifting Height
8 M
Appliacation
Underground Transportation
Transport Package
Container
Specification
DC225/129.5Y
Product Description
Company Profile
Shandong Energy Equipment Group Lu Zhong Equipment Manufacturing Co.,Ltd.(Lu Zhong Company For short) is the subsidiary of Shandong Energy Equipment Group, is located at the foot of the majestic Mount Tai. The company currently has over 1000 employees, a provincial-level technical center, and over 200 senior technicians.. Lu Zhong Company covers an area of 850,000 square meters, with 350 million yuan fixed assets and over 500 sets of various processing equipment. Lu Zhong Company is a high-tech enterprise specializing in the research and development, manufacturing, sales, and service of coal mining equipment. Starting from early 2010, we collaborated with Czech Ferrit to promote underground auxiliary transportation equipment. In April 2011, we jointly invested with Czech Ferrit Co., Ltd. to establish Taian Ferrit Machinery Co., Ltd., specializing in the research and development, sales, and service of underground auxiliary transportation equipment.Product Description
Explosion proof diesel monorail crane is an auxiliary transportation equipment with strong mobility, fast running speed, large load capacity, and safe and reliable operation on the suspended monorail system. It is mainly used for installation and retraction of coal mine comprehensive mining working faces. It has the characteristics of low system operation noise, low failure rate, easy maintenance and good grade-ability., and can achieve overall transportation of large equipment such as hydraulic supports. The locomotive runs on the suspended monorail system, and is not restricted by the floor conditions. The locomotive has good passing capacity.
The monorail crane locomotive follows the standard MT/T 883-2000, and the control cabinet follows the standards GB 3836.1, GB 3836.2, and GB 3836.4 Product Parameters
No | Item | Unit | Parameter values |
DC300/129.5Y | DC275/129.5Y | DC250/129.5Y | DC225/129.5Y | DC200/129.5Y | DC175/129.5Y | DC150/129.5Y |
1 | Tractive force(±5%) | kN | 300 | 275 | 250 | 225 | 200 | 175 | 150 |
2 | Running speed | Full drive Maximum speed | m/s | 0.85 | 0.93 | 1.02 | 1.13 | 1.27 | 1.46 | 1.70 |
Maximum speed (6wheel drive) | m/s | 1.7 |
3 | Over speed protection limiting value | m/s | 1.9 |
4 | Climbing capacity | ° | 25 |
5 | Turning radius | Horizontal(min) | m | 4 |
Vertical(min) | m | 8 |
6 | Steel rail type | | I140E/I140V |
7 | Quantity of drive unit | SET | 12 | 11 | 10 | 9 | 8 | 7 | 6 |
8 | Quantity of brake unit | SET | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
9 | Dimension | Length | mm | 22350 | 21200 | 20050 | 18900 | 17750 | 16600 | 15450 |
Width | mm | 960 |
Height(below the steel rail) | mm | 1335 |
10 | Diesel engine model | | TDE6105DZLYFB |
11 | diesel engine power | kW | 129.5 KW |
12 | Rated revolution | rpm | | | | 2200 rpm | | | |
13 | Hydraulic pump model | | Rexroth A4VG280HP1D00M1/40MRNE4A31FB2S4AD00(Displacement:280ml) |
14 | Hydraulic motor model | | MS05-2(Displacement:560ml) |
15 | Hydraulic system rated pressure | Mpa | 40 |
16 | Clamp system pressure | Mpa | 20 |
17 | Brake system pressure | Mpa | 12 |
18 | Deadweight | Kg | 10340 | 9845 | 9350 | 8855 | 8360 | 7865 | 7370 |
No | Item | Unit | Parameter values |
DC300/129.5Y | DC275/129.5Y | DC250/129.5Y | DC225/129.5Y | DC200/129.5Y | DC175/129.5Y | DC150/129.5Y |
1 | Tractive force(±5%) | kN | 300 | 275 | 250 | 225 | 200 | 175 | 150 |
2 | Running speed | Full drive Maximum speed | m/s | 0.85 | 0.93 | 1.02 | 1.13 | 1.27 | 1.46 | 1.70 |
Maximum speed (6wheel drive) | m/s | 1.7 |
3 | Over speed protection limiting value | m/s | 1.9 |
4 | Climbing capacity | ° | 25 |
5 | Turning radius | Horizontal(min) | m | 4 |
Vertical(min) | m | 8 |
6 | Steel rail type | | I140E/I140V |
7 | Quantity of drive unit | SET | 12 | 11 | 10 | 9 | 8 | 7 | 6 |
8 | Quantity of brake unit | SET | 14 | 13 | 12 | 11 | 10 | 9 | 8 |
9 | Dimension | Length | mm | 22350 | 21200 | 20050 | 18900 | 17750 | 16600 | 15450 |
Width | mm | 960 |
Height(below the steel rail) | mm | 1335 |
10 | Diesel engine model | | TDE6105DZLYFB |
11 | diesel engine power | kW | 129.5 KW |
12 | Rated revolution | rpm | | | | 2200 rpm | | | |
13 | Hydraulic pump model | | Rexroth A4VG280HP1D00M1/40MRNE4A31FB2S4AD00(Displacement:280ml) |
14 | Hydraulic motor model | | MS05-2(Displacement:560ml) |
15 | Hydraulic system rated pressure | Mpa | 40 |
16 | Clamp system pressure | Mpa | 20 |
17 | Brake system pressure | Mpa | 12 |
18 | Deadweight | Kg | 10340 | 9845 | 9350 | 8855 | 8360 | 7865 | 7370 |
Technical Requirements
1. Environmental conditions for use
The altitude shall not exceed 2000m;
1.1 Surrounding environment temperature -5 ºC -+40 ºC;
1.2 The relative humidity of the surrounding air shall not exceed 95% (+25 ºC);
1.3 The installation inclination with respect to the horizontal plane shall not exceed 25 °;
4.4 Places without dripping or dripping water.
2. Basic requirements
2.1 The locomotive shall comply with the requirements of this standard and be manufactured in accordance with the approved drawings and technical documents according to the prescribed procedures.
2.2 The explosion-proof diesel engine used for matching should comply with the relevant requirements of MT990 and obtain a "safety certificate", and the exhaust pollutant limit should meet the requirements of the third stage in GB 20891.
2.3 The non-metallic materials used in locomotives shall comply with the provisions of MT113, and the braking materials used shall be materials that will not explode or burn during braking.
2.4 The purchased and outsourced parts used in locomotives shall have a quality certificate. The performance and quality of supporting equipment should meet the design requirements, and can only be installed and used after passing the factory inspection.
2.5 The hydraulic system of the locomotive shall comply with the provisions of GB/T3766 and GB/T7935.
2.6 All supporting electrical components of the locomotive shall comply with the relevant requirements of GB/T 3836.1-2021, GB/T 3836.2-2021, GB/T 3836.4-2021, and GB/T 3836.9-2021. Those under safety standard management should have a safety standard certificate. The cables and wires should comply with the relevant requirements of MT 818.
2.7 The noise level at the driver's head position inside the cab should not exceed 90dBA.
2.8 Protective chains (poles) should be installed at the driver's entrance and exit on both sides of the cab. The controllers at both ends of the cab should use variable frequency speed regulation, and there should be an electrical interlock between the two sets of controllers. Only when one end of the controller handle is in the zero position can the other end be operated, but both sets can operate emergency braking.
2.9The minimum breaking force of the connecting device shall not be less than 10 times the rated traction force of the monorail locomotive.
2.10 A methane detection alarm and power outage device should be installed in the driver's cab. When the methane concentration reaches 0.5%, it should be able to automatically alarm and cause the explosion-proof diesel engine to automatically cut off fuel, and the entire vehicle to be powered off and stopped.
2.11 The locomotive should be equipped with bright lights and red signal lights in the front and rear directions. The illumination of the lights should ensure at least 4Lx at a distance of 20m ahead, and the visibility distance of the signal lights should be at least 60m.
2.12 The locomotive should be equipped with a working braking device, which should meet the requirements of emergency braking and parking functions. There should be independent working braking and emergency braking control mechanisms.
2.13 Emergency braking must be designed as a fail safe type and can be applied both manually and automatically.
2.14 Each cab of the locomotive should be equipped with a portable fire extinguisher.
2.15 Light metal materials should not be used on the external collision prone parts and nameplates of locomotives.
2.16 This vehicle is equipped with a sealing and intrinsic safety automatic protection device.
Installation Instructions
When any of the following abnormal situations occur, the control system will automatically alarm and shut down the engine within one minute:
The engine cooling water temperature reaches (93 ± 2) ºC;
The engine exhaust temperature reaches (68 ± 2) ºC;
The surface temperature of the engine reaches (148 ± 2) ºC;
The water level in the waste gas treatment tank is as low as 30mm;
The oil pressure is lower than (0.15 ± 0.02) MPa;
Gas concentration reaches 0.5%;
Detailed Photos
Address:
Tai′an High Tech Zone Paitianmen Street West Section, Tai′an, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Construction & Decoration, Health & Medicine, Metallurgy, Mineral & Energy, Service, Textile
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Shandong Yuan Equipment Group Luzhong Assembly Bar Manufacturing Co., Ltd., with a registered capital of 440 million yuan, is a national advanced technology enterprise with a provincial-level technology development center and Shandong Industrial Design Center. Luzhong Company has always focused on the research and manufacturing of solid-liquid separation equipment, providing high-quality solid-liquid separation equipment and solutions to global users. The company has LED the drafting of the Chinese vertical fully automatic diaphragm filter press industry standard "Vertical Fully Automatic Membrane Filter Press", standard number: JB/T11097-2011. The leading product, the vertical fully automatic diaphragm filter press, has 12 independent patented technologies and has obtained the China Environmental Protection Product Certification and the Shandong Province Science and Technology Third Prize.
Our company is one of the earliest domestic units engaged in the research and manufacturing of professional fully automatic vertical diaphragm filter presses. In 1994, we launched the BLZG35 square meter vertical filter press, breaking the situation where vertical filter presses rely solely on imports and entering the process of localization of vertical filter presses. This provides valuable reference experience for other domestic manufacturers in the development of vertical filter presses. After more than 20 years of market feedback and technical optimization, our company launched the fifth generation model of fully automatic vertical filter press, vertical plate and frame filter press, and fully automatic vertical diaphragm filter press. The product is exported to international markets such as the Democratic Republic of Congo, the Philippines, Zambia, South Korea, Serbia, and maintains a high domestic usage performance in the equipment market share in central Shandong. As of now, our company has sold over 400 sets of vertical filter presses in both domestic and foreign markets, involving more than 150 types of materials. Our products are widely used in various industries such as chemical, non-ferrous metals, starch, lithium batteries, food additives, molecular sieves, etc. At present, the company has a complete and authoritative vertical filter press production line. We have basically achieved the localization of imported vertical filter press accessories and the transformation of the main engine. Our company has advanced production and processing capabilities for polypropylene filter plates in vertical filter presses. We propose the design concept of "replacing steel with plastic", which not only improves the corrosion resistance of vertical filter presses, but also expands their application fields, effectively reducing the initial investment of users.